|
The Vigor 200 Pump is entirely constructed at our Fabrication shop. Using Inoxpa© heads, AC Tech frequency inverters, and Nord© motor and transmission. The cart is constructed entirely out of 304 Stainless steel. With high quality non-marking tires. High rise handle for ease of use with no bending over! Comes with a 50' power cord and a 50' cord with a Potentiometer (speed control remote) at the end of it for control of the pump without having to be right next to it. The entire pump is "wash down" ready.
Inoxpa© RF Flexible Impeller Head
The RF pump is a flexible impeller pump. Because of their design, these pumps are reversible and self-priming that can suction from a maximum height of 5 meters. This type of pumps can pump materials of both low and high viscosity, as well as materials containing particles or gases.
Their main uses include pumping in dairies, edible oils, wine, concentrates and beverages in general.
Due to the eccentric shape of the pump housing, a vacuum is created in the suction side that enlarges the volume between the blades and this causes the product suction.
By spinning the rotor, the product is carried from the suction side to that of delivery.
Due to the eccentric shape of the pump housing, in the discharge side the blades bend, reducing the volume between them and causing the discharge of the product.
Easy maintenance.
Impeller driven by a double flat shaft.
Machined stainless steel investment casting casing.
Connections DIN 11851.
Motor according to IEC standards. B34, 1500 rpm, 3HP, 230/400 V, 50 Hz, IP55.
External single mechanical seal.
Double flat drive of the impeller.
Bare shaft o close-coupled construction.
Ra<0.8 µm surface finishing.
White painted.
Reversible and self-priming.
Nord Motor & Transmission Features
Lightweight housing, stronger bearings: NORDBLOC gear motors have been constructively and significantly improved for the new design. The design is based on lightweight aluminum die cast housings allow for the integration of larger and stronger bearings, further the drive units can now be installed more efficiently.
- Durable, natural protection against corrosion
- Longer service life
- You can add a very short, space-saving, weight-saving IEC adapter
- Optional ATEX model
- Gear motors are available with feet, flanges, or as combined variants
AC Tech Frequency Inverter Features
AC Tech SMV Frequency Inverter Features
The most technically advanced inverter drive continues Lenze - AC Tech's tradition of innovative compact inverter design. The performance and flexibility make the SMVector an attractive solution for a broad range of AC Motor applications and with several communications protocols available, networking drives and components into a system solution can be done now or in the future.
Programmable digital and analog I/O allow the drive to be configured for many application specific tasks such as multiple preset speeds, electronic braking and motor jogging to name a few. Like all Lenze - AC Tech sub-micro drives, the SMVector uses EPM memory technology for fast and efficient programming.
|
