Athena

Press Athena 32 HL

Please Contact us for a Customized Quote.

32 HL Central Inflating Memebrane Press

Benefits of Central Inflating Membranes vs Traditional Bladder Presses

  • Higher Quality Yields
  • Higher Yields
  • Less Heavy Tannins
  • Faster Pressing Cycles
  • Less Oxidation, Less Browning on Whites
  • No Load Minimums

Functioning Principle

Having a Thinner Cake Leads to Several Advantages

New Technology Membrane Presses

  • Higher Yields at Much Lower Pressures
  • Higher Quality Yields
  • Less Heavy Tannins
  • Faster Pressing Cycles
  • Less Oxidation, Less Browning on Whites
  • Inert Gas Injection into the Drum
  • No Load Minimums
  • Bladder can reach the entire circumference of the Drum 
  • Even Pressures throughout the Press
  • 10 to 20 years Lifespan on the Bladder (5/16" Thick)
  • Lower Energy Consumption
  • Ability to Press Crushed Apples and Deshelled Pomegrantes

 

 

Old Technology Bladder Presses

Horizontal Nylon Bladder Presses

 

  • Lower Yields at Higher Pressures
  • Indroduction of Heavy Tannins from the skins due to high pressures needed to achieve yields 
  • Longer Pressing Cycles
  • More Lees and Fining due to having to break the Cake Multiple Times
  • More Oxidation, More Browning on Whites due to longer Pressing Cycles
  • Minimum Load Capacities for Press use and Press Efficiency
  • Thin Nylon Bladder, easier to tear and needs to be replaced more frequently (less than 1/16" thick 

Technical Features:

  • Tank capacity: 32 hl
  • Tubular elastic membrane approved for food applications, supported by inner clevises; thickness: 7.5 mm
  • Wholly-pierced stainless-steel tank
  • Air compressor for air inlet and outlet
  • Self-braking motor reducer for tank rotation
  • Power supply: 230 V – 3 phases – 60 Hz; maximum requested power: 5.3 kW
  • Rotation transmission by crown, pinion and chain
  • Double door for tank loading and marcs discharge
  • Axial loading with stainless-steel 150-mm ball valve with 4" clamp fitting
  • Fixed hanging must-collecting hopper; hopper fitting: 2" clamp
  • Central sliding skid for marcs discharge
  • Automatic device for must-hopper level control and pump drive
  • Side doors on the chassis can be opened
  • Inside conveyors for marcs discharge
  • Porthole for inspection and washing
  • Wheels for press movement (Optional) Not Included
  • Washing pipe with nozzles, 1” ball-valve connection
  • Electrical board, IP66 protection
  • Electromechanical manual commands on a pushbutton control board with cable, actionable while moving around the press; manual command are electromechanical and not managed by the electronical devices
  • Automatic pressing cycle controlled by PLC and colour touch-screen operating panel by Omron. Simple, flexible and robust program, allows, amongst else:
    • to visualize cycle parameters and state of the process
    • to add customized programs
    • to execute special programs like Cremant
    • to have options like skipping phases, repeating phases etc.
    • to manage automatically marcs discharge
    • to shift among different languages (including English and Spanish)
  • Main sizes: length: 4500 mm, width: 1700 mm; height: 2500 mm (including 500 mm raising legs); weight: 1450 kg
  • Entirely built in first-rate AISI 304 stainless steel

Pressing Times:

  • fermented grapes: 40 to 50 minutes
  • non difficult-to-break white grapes: 1 h – 1 h 15’;
  • difficult-to-break white grapes (like muscat): 1 h 30' - 2 h
  • apples (chopped): 2 h 30' – 4 h, depending on requested yield and apples quality
  • pomegranates: 1 h 30’ - 2h

Loading Capacity HL 32

 

Average Daily Production

(Based on 10 working hours/day)

Production

Tons

Kg

Tons

Kg

Whole Grapes (Door Loading)

2.42 - 3.02

2200-2750

14

12727

Whole Grapes (Axial Loading)

3.52 - 4.29

3200-3900

19

17,272

Destemmed Grapes

6.27 - 8.25

5700-7500

31

28,181

Fermented Grapes (Tank Capacity)

3432 - 4224 Gal.

130-160 hl

95

86,363

Apples (Chopped)

3.08 - 4.18

2800-3800 kg

10.5

9,545